P7600 P5100 P3100 P360 P257 P197 P124 Series P7600C367AX 1119041030 Gear Oil Pump P7600-F160NM467 6G P3100B367AHNJ20-14AQZA07-1

Specific technical parameters for the P7600C367AX 1119041030 hydraulic pump are not widely publicly available in standard industry
databases, as detailed specs often depend on manufacturer-specific configurations and application requirements. However, based on
its model structure, association with the Permco P7600 series, and typical characteristics of similar models, here is a projected
technical parameter framework for reference:

Parameter CategoryEstimated Specifications (Based on P7600 series norms)TypeGear-type hydraulic pump (likely a single-pump
configuration)DisplacementApproximately 60–100 ml/r (inferred from “C367″ suffix, aligning with mid-range P7600 displacement)
Working Pressure- Nominal pressure: 25–28 MPa
– Continuous operating pressure: Up to 31.5 MPa
– Peak pressure (intermittent): 35 MPaSpeed Range- Maximum input speed: 2800 rpm
– Optimal operating speed: 1500–2500 rpmMaterial- Pump body: High-strength cast iron (GG25/GG30) for pressure resistance
– Gears: Precision-ground alloy steel with surface hardening (HRC 58–62)Mounting StandardSAE flange mounting (likely SAE B or C
flange, common in P7600 series)Port ConfigurationSAE straight thread ports (size may correspond to displacement, e.g., SAE 3/4″ or
1”)Fluid CompatibilityISO VG 32/46 mineral oil-based hydraulic fluids (standard for gear pumps)Operating Temperature-10°C to 80°C
(recommended range to maintain seal integrity)Efficiency- Volumetric efficiency: ≥ 92% (at rated pressure/speed)
– Mechanical efficiency: ≥ 89%

For exact, verified parameters (e.g., precise displacement, port dimensions, or customization details), it is strongly recommended
to:

1. Reference the official technical datasheet from Permco (via their website or authorized distributors).
2. Provide the full model number (including the “1119041030” identifier) to the manufacturer for tailored specifications, as this
suffix likely denotes a specific production batch or application variant.